Products : Series 1&2 Shutters

Specifications

Curtain:
SERIES 1 is constructed from extruded aluminium slats with a face depth of 2.4” x 0.06” thick. Optional
slotting of 3.9” x 1.0”.

SERIES 2 is as the above details with a face depth of 2.9” x 0.06”. Nylon end clips shall be fitted to alternate slats to
prevent lateral movement and provide smooth operation, free from lubrication. Optional slotting of 8.8” x 1.6” or perforations of 0.2” holes at 0.4” centres are available to any number of slats.

Clear vision panels of acrylic or polycarbonate can be fitted to the slotted slots providing a dust seal.

Slide Guide:
2.0” x 1.3” extruded aluminium with false back for concealed fixing. Optional Nylofelt Buffer available.

Locking:
Shall be centrally mounted, two way Mortice Key Lock or Sliding Shoot Bolt locking, mounted within the bottom rail. Optional waist high locking is also available.

Bottom Rail:
3.5” x 1.9” extruded aluminium section incorporating locking device and concealed locking rods and optional PVC buffer.

Brackets:
Manufactured from 3.5” x 1.6” mild steel.

Roller Drum:
Manufactured from 9” spiral ducted tube attached to ball bearing drum wheels rotating on a 1.3” steel shaft. The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.

Mullions:
Specially designed one piece extrusion for straight openings and two piece sections that can be set to any angle and shall be used for wide openings and multiple door installations. Mullions shall be lift out type with shoot bolts to base.

Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).

Finish:
Anodized and powder coat colors.

Operation:
Available in manual or motorized operation.